what is aluminium plate

**Robin Hewitt** · 10-10-2012

Originally Posted by jcb121

Aluminium is always an alloy in any use.

AW-1050 is 99.something percent pure and is usually sold as sheet, with or without a plastic facing. Horrible to cut, great big burrrs if you drill it.

Edit: Forgot the link... aluSelect: Applications

**Peter.** · 10-10-2012

Originally Posted by Robin Hewitt

AW-1050 is 99.something percent pure and is usually sold as sheet, with or without a plastic facing. Horrible to cut, great big burrrs if you drill it.

Edit: Forgot the link... aluSelect: Applications

Yup, my intercooler cores are EN-AW-1050A - 99.5% aluminium.

**martin54** · 10-10-2012

Just a thought, a lot of machines seem to use an extruded profile like Bosch Rexroth so does this give the same problems or is a bit of plate mounted on top of it for the rails to sit on. Sorry if it sounds like a silly question but just trying to make sure I do it right next time.

**TonyD** · 10-10-2012

Hello Martin.

I've kept an eye on this site Aluminium Supplier | Aluminium Stock | Aluminium Warehouse for the EcoCast plate, as Jonathan says its premachined on both sides, looks like a good option. No doubt other folks will comment if its not. I costed a 20mm thick plate using the EcoCast of approx 450X200 one off for just under 40 GBP before VAT and Shipping. I havent gone ahead yet so cant confirm shipping. From what I've read here Alu plate is desirable becuase it is easier than steel to machine. So for those with an existing machine that can cut Alu, a good option. I do wonder what a comparable size steel plate would need to be for the same rigidity, I'm assuming 1/3 the thickness due to a comment I read somewhere about material density? As I dont have a machine already I'm not planning to rebate the Z Axis rails etc so I might just go for 7 or 8mm thick steel, but like yourself, I'm still reviewing options.