Fingers crossed it'll cut ally

[JAZZCNC]

Geoffrey, any chance of having a look at your dxf, and what size are your gast pumps?
Many thanks in advance
Simon

Simon you'll have fun trying to suck sponge down. ..

Got the perfect stuff for you to make Vac bed with. It's a man made resin board that machines great is super flat and hard has nails. It's Called Trespa Athlon look it up.
Got some that's 20mm and some that's around 12-15mm but would need to check that.?

Let me know if you want some and size and I'll chop you piece and take to work for next time your over our way.

[Bazzer]

Simon you'll have fun trying to suck sponge down. ..

My favourite hobby sucking sponge !!!

Would love FREE trespa, you can take the boy out of Yorkshire, but you can't take the Yorkshire out of the boy!

[GEOFFREY]

Michael, Simon, I would post the dxf here, but don't seem to be able to do so. That is why I asked for email. Will check on my pump sizes tomorrow and post. Obviously my drawing is to suit my machine and will need modding. I have made 2 circuits, one for each pump. Each pump is simply plugged into a double socket and switched on and off as necessary, no valves, reservoirs or vac controllers etc. very simple,but effective.
JAZZ's offer of the free trespa sounds unbelieveable - Almost makes me wish I was a "northerner". G.

Any help on how to add an attachment on here would be very useful. thanks. G.

[birchy]

Geoffrey, if you click "Go Advanced" in the bottom right corner of the "Quick Reply" box, you get some extra options, one of which is "Add Attachment". the icon looks like a sheet of paper with a paper clip on it.

[GEOFFREY]

Thanks Birchy, trying that nowvac bed.dxf





I have tried to open it here, but the grooves (channels) seem a bit incomplete. My dxf output was set to six decimal places, maybe I should have reduced that. Any way let me know if it is readable, if not I'll try again. G.

[birchy]

Looks OK in DraftSight on my Linux machine.