Small metal Lathes / IE 350 to 50W machines

[JAZZCNC]

I would go snatch that Star up before it's gone, thats a very nice and capable Lathe for that money.

[dudz]

I would go snatch that Star up before it's gone, thats a very nice and capable Lathe for that money.

Well he is a 10 hour drive from me, but I have made him the best offer I can (A 2004 GasGas txt pro trials bike) but I am not holding my breath !!

[JAZZCNC]

Well he is a 10 hour drive from me, but I have made him the best offer I can (A 2004 GasGas txt pro trials bike) but I am not holding my breath !!

Nice Bike (Got 2011 280 Beta factory myself) and worth little more than the Lathe so if he's into bikes he'll take you upon it, I would anyway.!

[Swarfing]

How about these if you are looking at more money?

Annonces Colchester tour Toute la France - leboncoin.fr


If you have the room?

Tour COLCHESTER MASCOT 1600 Équipements Industriels Haute-Savoie - leboncoin.fr

Much smaller

Tour à metaux colchester 5x20 chipmaster Bricolage Ille-et-Vilaine - leboncoin.fr

Better still don't mess around and get a CNC lathe

Tour numerique Équipements Industriels Ardèche - leboncoin.fr

[JAZZCNC]

Bloody hell that Emco's cheap It's almost worth a trip to France.!!

[dudz]

How about this :
Tour hernault Bricolage Finistère - leboncoin.fr

or this ;
Tour a metaux Bricolage Ille-et-Vilaine - leboncoin.fr

Or this ;
Tour à métaux EMCO MAXIMAT V10-P tour fraiseuse Bricolage Morbihan - leboncoin.fr

[mekanik]

Hi dudz
I only had a look @ the Elliot as i bought a new Emcomat 7L about 30 years ago,desperately wanted the the V10 but way out of my price range @ the time, my user manual includes the Emcomat 7 & the Maximat V10, if you have a look @ the support bracket @ the end of the bed you will notice it seems long, this is because there should be a feed shaft below the leadscrew(the one with the handwheel) the machine looks like it's has had a rough life and without the feed screw being present the operator will more than likely have been using the laedscrew for feeding the saddle so could be well worn if it was in better condition it would have been a nice machine & the vertical column is very handy, i have one on mine and can do light milling & gear cutting. You could check to see if spare are still available.

[dudz]

The first two were jokes anyway. Couldnnt belive they seriously wanted money for them. Second one looks like a converted clothes mangle.