Yet another Chinese 3020 CNC upgrade thread!

[JAZZCNC]

WOW! that is a very generous offer Jazz, but I wouldn't expect anyone to do it for free, it has to be worth a couple of beers at least.

It wouldn't be a one off as there will be a front and back back. I am also considering cutting some holes for 90mm fans on each side.

Don't mind doing it FOC but My main problem is I'm very time limited so machine is always busy when I'm in workshop and fitting in large jobs just hisn't possible without planning well ahead and recently machines been broke down so I'm well behind anyway but I can slip in the Odd quick job so if it's quick I'll do it.

Draw it up and let me have a look.

[Pointy]

Don't mind doing it FOC but My main problem is I'm very time limited so machine is always busy when I'm in workshop and fitting in large jobs just hisn't possible without planning well ahead and recently machines been broke down so I'm well behind anyway but I can slip in the Odd quick job so if it's quick I'll do it.

Draw it up and let me have a look.

Thanks again, I have an idea in mind of what I want, but I need decide on the switches, buttons & connectors. It could be a couple of weeks off yet, depending on when the other parts arrive. Anyway as soon as I have a rough idea I will draw something up.

Regards,

Les