Help needed identifying this 1300x2500 CnC Router Machine!

[EddyCurrent]

Looks like it was here, in a job lot I think so price is for other stuff too ? no more info unfortunately.

(scroll down the page a bit) Fresa usados, baratos para venda

[JAZZCNC]

Looks like it was here, in a job lot I think so price is for other stuff too ? no more info unfortunately.

(scroll down the page a bit) Fresa usados, baratos para venda

Eddy Current that's not what the Op asked or probably wanted broadcasting.! . .

Shapebuster: Sorry don't know the make but Like others say it looks like chinese type machine but resonably well built, thou if that is the price then it's not really worth that sort of money unless it's fully working with Tool changer and Vacuum pump pump and even then I think it's not overly cheap.

[EddyCurrent]

Eddy Current that's not what the Op asked or probably wanted broadcasting.! . .

Never mind thumbs down ! I knew it had gone, the link from there was dead, it was to give some idea of price, if you read the text in the ad it was part of a job lot.

[JAZZCNC]

Never mind thumbs down ! I knew it had gone, the link from there was dead, it was to give some idea of price, if you read the text in the ad it was part of a job lot.

But you didn't know that you just assumed and we all know what ASSuming leads too.!!. . . . . . . .He didn't ask for a Price he asked for Opinions on it and if it had still been up for sale you could have lost it for him.!! . . . So Ye your still getting

Shapebuster: 3K seems fair price if it's all working.
Things to look out for are just the obvious like Rusty rails, Sloppy linear bearings so grab them firmly and feel for movement, Worn teeth on Rack and Pinion, Check spindle turns freely and again grab firmly at nose and feel for movement.
Less of a concern but still worth Checking if wires are brittle or chewed by mice etc if it's been stood for some time.

Hope it works well for you.!

[shapebusters]

But you didn't know that you just assumed and we all know what ASSuming leads too.!!. . . . . . . .He didn't ask for a Price he asked for Opinions on it and if it had still been up for sale you could have lost it for him.!! . . . So Ye your still getting

Shapebuster: 3K seems fair price if it's all working.
Things to look out for are just the obvious like Rusty rails, Sloppy linear bearings so grab them firmly and feel for movement, Worn teeth on Rack and Pinion, Check spindle turns freely and again grab firmly at nose and feel for movement.
Less of a concern but still worth Checking if wires are brittle or chewed by mice etc if it's been stood for some time.

Hope it works well for you.!

Thank you!
You know in Portugal its not easy to get this machines (at least bigger ones) and they are overpriced. Most of them its bought by professional machinery resellers.
It looks like a very good business. The seller has a lot of stuff he wants to get rid of, and i will be taking a pickup truck and an extra trailer to take what i might use.
If everything goes well (this weekend i will build a heavy duty pallet to load the machine, and i believe that with a trailer that is 3m long a winch, and a pallet lift i will be able to load the machine in the trailer. I will wrap it with clear plastic and hold it firmly for the 300km travel.
If all goes well i will be posting a new post with the machine!
Its great, because im building a CoWork/Makers space, and a lot of the interior furniture will be done by me in the cnc, straight from Rhino.
After with the machine in my possession, i will have new concerns: how will i be able to use Rhinocam with the CNC, do a full machine revision and maintenance, etc.

[EddyCurrent]

But you didn't know that you just assumed and we all know what ASSuming leads too.!!. . . . . . . .He didn't ask for a Price he asked for Opinions on it and if it had still been up for sale you could have lost it for him.!! . . . So Ye your still getting

1. I did not assume, I followed the links and the original advert had clearly gone
2. I am not an ASS and I don't need silly little sayings posted to that effect
3. Price usually forms part of the opinion making process, it does in my world.
4.

[shapebusters]

Eddy Current that's not what the Op asked or probably wanted broadcasting.! . .

Shapebuster: Sorry don't know the make but Like others say it looks like chinese type machine but resonably well built, thou if that is the price then it's not really worth that sort of money unless it's fully working with Tool changer and Vacuum pump pump and even then I think it's not overly cheap.

From what i have looked its as similarities to this one dont you think?




Maybe Its a older model of this SUDA VG1325 cnc router, from ONGXING TECHNOLOGY DEVELOPMENT Co
http://www.sudacnc.cn/offer/526836431.html

https://www.youtube.com/watch?v=EHYUWLCrrI8

With this specs:http://www.txgm.dpes.com.cn/product/2011/12/278.html

What do you think?

[JAZZCNC]

Yes that looks very much like the machine doesn't it. I noticed the weight is 1250Kg which i would say is more realistic than 750Kg. That's not overly heavy so should move it easy enough.

Good Luck.

[shapebusters]

Yes that looks very much like the machine doesn't it. I noticed the weight is 1250Kg which i would say is more realistic than 750Kg. That's not overly heavy so should move it easy enough.

Good Luck.

Thank you for your help!
So you keep your opinion about the purchase relating to the quality of the machine? Any special precaution to check, or do prior to the "moving"?

[JAZZCNC]

So you keep your opinion about the purchase relating to the quality of the machine? Any special precaution to check, or do prior to the "moving"?

Yes it's just about what thought it would be for chinese built machine, not the best in the world but more than good enough for most small wood shops.
Nothing to add about moving the machine other than common sense lock every thing down.

Looking at the picture your machine as Hi-win rails which are decent quality so they shouldn't be wornout looking at the condition of the machine. Condition of Rack & pinion would be my main area to look at when you have it home. This will be the weak area on this machine either because of quality or poor maintenance and setup.
R&P wears very quickly if not setup correctly, often it's over tightened to eliminate backlash and this causes excess friction so wears the Rack. Or other way and not maintained and pinion is under engaged so wears tops of teeth away.!

Electronicly then can't say because it's like a box of Chocolates with Chinese machines "You never know what your going to get" but often they are one area they compromise to keep costs down.? Post pictures when you have it home and settled.

Shame your so far away Else I'd gladly come help you move it and get working.!!. . . . Thou it does like nice and Hot there so if you want to send me ticket for plane ride I may be tempted to a Bus mans holiday. .