Help needed identifying this 1300x2500 CnC Router Machine!

[JAZZCNC]

So you keep your opinion about the purchase relating to the quality of the machine? Any special precaution to check, or do prior to the "moving"?

Yes it's just about what thought it would be for chinese built machine, not the best in the world but more than good enough for most small wood shops.
Nothing to add about moving the machine other than common sense lock every thing down.

Looking at the picture your machine as Hi-win rails which are decent quality so they shouldn't be wornout looking at the condition of the machine. Condition of Rack & pinion would be my main area to look at when you have it home. This will be the weak area on this machine either because of quality or poor maintenance and setup.
R&P wears very quickly if not setup correctly, often it's over tightened to eliminate backlash and this causes excess friction so wears the Rack. Or other way and not maintained and pinion is under engaged so wears tops of teeth away.!

Electronicly then can't say because it's like a box of Chocolates with Chinese machines "You never know what your going to get" but often they are one area they compromise to keep costs down.? Post pictures when you have it home and settled.

Shame your so far away Else I'd gladly come help you move it and get working.!!. . . . Thou it does like nice and Hot there so if you want to send me ticket for plane ride I may be tempted to a Bus mans holiday. .