Quote Originally Posted by Dean jeffery View Post
Nobody able to answer my question, will I be able to get the machine down the side if my house.
How can anyone tell you that when you haven't specified a particular machine. Denford triacs come in few forms so unless you know exactly the model few can accurately answer. Those that have Triacs could answer but there model spec may be differant to what you "May" end up buying.!
i2i as good experience with these machines but obviously you can't tell him which model so again he probably can't answer your question accurately.

Personally I would find a machine you like get intouch and get them to accurately measure it in several places. Also at worst case if you find it doesn't fit then you can always strip it down and take inside.! This is common practice with mills and it doesn't hurt to give the machine a good clean from the start and get to know it intimately.

Good luck