Quick bit of help

[amxen]

dont know if any one will pick this up . but i need recommendations for 4 core shielded cable. im gonna replace mine

thanks mick. uk btw

[Clive S]

dont know if any one will pick this up . but i need recommendations for 4 core shielded cable. im gonna replace mine

thanks mick. uk btw

This is one place http://quickbit.co.uk/Cable/CY-Cable...-0-75mm-4-core but if you do a search on here you will find a better place (cable) or here; http://www.electrical-trader.co.uk/c...-cy-cable.html ..Clive

[JAZZCNC]

Said it before but I'll repeat it because those 2 places are the same.? (Same number). . . . I don't like Quickbit cable as it's brittle and actually think it's the same stuff they use on these chinese machines, it's certainly feels like it.

I use CSE cables. Never had any trouble with it and used 100's of meters. http://www.csecables.com/acatalog/CY-Cable.html

[amxen]

thanks again all. is 1.5mm upto the job ?

[JAZZCNC]

thanks again all. is 1.5mm upto the job ?

More than enough 1mm will be enough.

[Clive S]

Said it before but I'll repeat it because those 2 places are the same.? (Same number). . . . I don't like Quickbit cable as it's brittle and actually think it's the same stuff they use on these chinese machines, it's certainly feels like it.

I use CSE cables. Never had any trouble with it and used 100's of meters. http://www.csecables.com/acatalog/CY-Cable.html

Yes your dead right that was the company I was looking for but my brain failed. ..Clive