What is meant by 4-core CY cable?

[T0rnado69]

is this the site clive S ?

[JAZZCNC]

is this the site clive S ?

Yes that's the site and yes it's better than the Quickbit stuff.

[D-man]

Really, i thought it was cheap.... maybe because everything else was so expensive haha

Cheers guys

[Clive S]

Glad you got sorted. I have been beaten to it by the night owls or (elves) I have added the link to my post as well. ..Clive

[D-man]

OK guys sorry maybe a silly question but what wirethickness do i need? im using Nema 34 all round apart from the Z

[Clive S]

OK guys sorry maybe a silly question but what wirethickness do i need? im using Nema 34 all round apart from the Z

In that case I would use 1.5mm but do you really need nema 34 motors if so is your power supply big enough? ..Clive

[D-man]

Thanks Clive, Yeah i need 34 all round as its a heavy gantry with future plans for it to put on a little more weight! This is the setup i had before i stripped my last machine down due to a huge bust up with my last boss. unfortunatly everything else was left :(

I decided to run R&P on the X with cncrouterparts pro drives

[D-man]

Clive would i be right in saying that the 2.5 would be ok to power the spindle? from the spindle to the VFD

[Clive S]

Clive would i be right in saying that the 2.5 would be ok to power the spindle? from the spindle to the VFD

2.5mm will be fine I take it that it is a 2.2Kw spindle I personally would use 1.5mm but others might say not. ..Clive