Wanted Powermill to mach3 post

[EddyCurrent]

This any use ?

http://www.cnczone.com/forums/powerm...rocessors.html

[lukecnc2012]

thank you for the link great help,just hope one of them works,will update if it works ok.

This any use ?

http://www.cnczone.com/forums/powerm...rocessors.html

[lukecnc2012]

Think you have to be a member for a certain period so can't seem to get it.any other post that work much appreciated

[lukecnc2012]

Hi all tried the fanuc 1c post and don't seem to work on most strategies unfortunately.anyone got any that work or advice would be much appreciated

[gianluca_g]

what version of powermill are you using? there is a number of post that works well with mach3 among the standard post that comes with powermill

[lukecnc2012]

Hi thank you for the rely I was using 2012/2014 version at work but never found a post so Brough bobcad for the hobby machine would be good to have a good PM post for people using it

[gianluca_g]

on powermill 2014 and 2015 i use the MAHO post that comes with powermill and it works good for me