. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 21-02-2015 #1
    Ger21's Avatar
    Lives in Detroit, United States.
    Ger21
    Last Activity: 24-07-2022 Has been a member for 9-10 years. Has a total post count of 651. Received thanks 90 times, giving thanks to others 0 times. Referred 1 members to the community.
    Use PEDIT in AutoCAD To join lines and arcs into a continuous closed polyline.
    Last edited by Ger21; 21-02-2015 at 04:49 PM.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Ger21 For This Useful Post:

    Clive S
  3. 21-02-2015 #2
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 17 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,342. Received thanks 618 times, giving thanks to others 82 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by Ger21 View Post
    Use PEDIT in AutoCAD To join lines and arcs into a continuous closed polyline.
    Thanks Gerry That's what I was looking for. ..Clive
    Reply With Quote Reply With Quote
  4. 21-02-2015 #3
    charlieuk's Avatar
    Lives in brighton, United Kingdom.
    charlieuk
    Last Activity: 29-11-2024 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 14 times, giving thanks to others 19 times.
    cool will try that many thanks

    I just had it cutting and all looks good however I noticed that the 3mm holes I had it does not want to do with the 3mm cutter is that because you cant go straight down only? ( this is using my file)

    many thanks
    Reply With Quote Reply With Quote
  5. 21-02-2015 #4
    GEOFFREY's Avatar
    Lives in bourne, United Kingdom.
    GEOFFREY
    Last Activity: 14-01-2024 Has been a member for 9-10 years. Has a total post count of 769. Received thanks 48 times, giving thanks to others 55 times.
    Try making the holes 3.1mm and rout them out. ( might even work with 3.01mm). G.
    Reply With Quote Reply With Quote

  6. The Following User Says Thank You to GEOFFREY For This Useful Post:

  7. 21-02-2015 #5
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 02-10-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,197. Received thanks 276 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Quote Originally Posted by GEOFFREY View Post
    Try making the holes 3.1mm and rout them out. ( might even work with 3.01mm). G.
    3mm works fine if using a drill mop
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote

  8. The Following User Says Thank You to EddyCurrent For This Useful Post:

  9. 22-02-2015 #6
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 17 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,342. Received thanks 618 times, giving thanks to others 82 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    I agree with Geoff make the holes 3.1mm and do them with the same endmil spiral down. ..Clive
    Reply With Quote Reply With Quote

  10. The Following User Says Thank You to Clive S For This Useful Post:

  11. 22-02-2015 #7
    charlieuk's Avatar
    Lives in brighton, United Kingdom.
    charlieuk
    Last Activity: 29-11-2024 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 14 times, giving thanks to others 19 times.
    i still seam to be having the same problem? i made the holes 3.2mm but it is not till i reduce the cutter to 2.6 that it seams to want to include them? any ideas is there another setting i have got wrong? I have attached the file hopefully it shows the setting. many thanks
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Basic Frame Design
    By Ross77 in forum Machine Frames & Beds
    Replies: 0
    Last Post: 04-01-2015, 01:33 AM
  2. The ideal CNC machine for my (basic)needs?
    By mark84 in forum Machine Discussion
    Replies: 9
    Last Post: 12-03-2014, 10:56 AM
  3. NEW MEMBER: Basic 3d milling
    By proddy in forum New Member Introductions
    Replies: 3
    Last Post: 08-06-2012, 12:11 AM
  4. Advice on some basic tools
    By GTJim in forum General Discussion
    Replies: 10
    Last Post: 22-09-2011, 12:16 PM
  5. Which Basic Lathe
    By graysclassics in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 06-07-2011, 10:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules