Fogless Mister Systems

[johnsattuk]

That being said it still leaves the question of the nozzle/delivering tube/body /support/connectors assembly. How do you do that?

Another question is the complexity, some times simple things last longer in industrial enviroment , on the other hand it can be expensive for eventual time to time home use or on a small cheap machine.

I mean is one thing to design an usefull system. My Russian friend who is an experienced model maker did his system for under 5 minutes from what he had at hand.
Its another thing to design cheap, clever, reliable and nice looking product/in that order that could cover most of the real needs of fellow machinists.

You made that for yourself or with the idea of selling it?

And when you will need the squirting? from my experiments even tiny tube could give tremendous flow. In fact for comparison 1mm nozzle gives 160l/min flow if i remember correctly some plasma cutter torch specifications

Since there is no requirement for a venturi or pressurized container almost anything works, I just used an old NOGA that I had.

I made it for myself, I have no commercial intentions whatsoever. I am 80yrs old and in the middle of a delayed midlife crisis.

If you don't need squirting, then don't use it