. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-04-2015 #5
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by davegrennan View Post
    JAZZ, yes I set Pulley 1 to speed 0 - 24000 ratio 1. That was in the BOB documentation
    When you say 9.64V at 100% you have entered 24000 rpm as the spindle speed in Mach havent you.? . . .. 100% is of the commanded speed not your VFD.!!

    Try tweaking the pulley speeds and you should be able to dial it in.!
    Last edited by JAZZCNC; 09-04-2015 at 05:25 PM.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  2. Spindle Speed Control
    By cncJim in forum Spindles & Drive Motors
    Replies: 15
    Last Post: 18-06-2013, 07:53 PM
  3. eBay: UIM2901-5A Mach3 breakout board with spindle speed control
    By Fivetide in forum Items On eBay UK
    Replies: 0
    Last Post: 05-02-2013, 07:25 PM
  4. Spindle Speed Measurement
    By clockmaker in forum Spindles & Drive Motors
    Replies: 2
    Last Post: 04-12-2010, 11:38 PM
  5. High speed spindle
    By leadinglights in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 27-04-2010, 09:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules