Thread: Is this motor faulty?
Hybrid View
-
29-11-2015 #1
Chaz There is a drawing on the pdf you linked to with a cap does it say the value of the cap? How exactly do you have it connected.
..Clive
The more you know, The better you know, How little you know
-
29-11-2015 #2
-
29-11-2015 #3
-
30-11-2015 #4
-
30-11-2015 #5
-
30-11-2015 #6
The wiring was a Star connected 6 wire system. That said, when I checked the pattern, it didnt match the drawing in the document, someone could have messed with it.
Ill try delta connection tonight and see if that helps before considering buying a VFD (£120 ish for a 4KW unit that can run the 4KW spindle later).
-
30-11-2015 #7
If you can use a 4kw VFD then you have a 3~ mains. A normal 1~VFD have a maximum of 2,2kW.
Thats the maximum, what your 13Amp power socket is capable. The VFD can have more power then the motor, but should be in a similiar power range, 1,5 to 2 * the Motor is ok but not 5 times.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
3.0Nm stepper from Zapp stopped working / faulty
By Jonathan in forum Stepper & Servo MotorsReplies: 8Last Post: 10-05-2017, 08:59 PM -
AC servo motor to replace a 3 phase induction motor on a mill spindle.
By rnr107 in forum Spindles & Drive MotorsReplies: 2Last Post: 23-04-2014, 03:14 PM -
servo motor as spindle motor
By Scott in forum General DiscussionReplies: 1Last Post: 03-10-2010, 06:42 PM -
Air compressor - faulty, how do I get the motor out?!
By HankMcSpank in forum General DiscussionReplies: 5Last Post: 26-10-2009, 11:33 AM



Reply With Quote

Bookmarks