Thread milling shallow bind hole

[njhussey]

Hi Neil,
I am not sure so don't quote me on it but I think I got my ones from J&L. I notice you mention thread mills and good sport I notice you don't mention 316 in the same sentence!
I was watching one of your videos earlier in the inspiration thread you build looked to work out a treat for you.
Cheers
Steve

Cheers Steve, so far its all good... Just need to get a week on it to finish it off and start the mounting frame...

Stainless is a bugger as unless you use some form of lube the threads gall and snag when tightening so I can imagine it's a bugger to tap and threadmill!

[suesi34e]

Cheers Steve, so far its all good... Just need to get a week on it to finish it off and start the mounting frame...

Stainless is a bugger as unless you use some form of lube the threads gall and snag when tightening so I can imagine it's a bugger to tap and threadmill!

Yes mate, it is a bugger in my book especially when not best geared up for it!
Congrats on your build happy CNCing
Steve