Thanx for having me 😅

For now i guess the ballscrews are going to be typical C7 rolled Chinese.

The 1st question i have at this point.
what would give best results.

A) Slave the 1600mm balscrew steppers or;
(i am not up to speed on how this actually works but i do get the general idea)

B) Connect the ballscrews through a belt and a single stepper.

And is then still a nema 23 3nm ?

Total length of this belt would be +/- 2300mm.




Verstuurd vanaf mijn SM-G7102 met Tapatalk