Building a plasma table, need advice.

[stirling]

What is the reason that are you asking me?

Hi Boyan

Was just hoping for reasons why you say things like "dedicated THC is a MUST" and "Avoid cheap THC which are not dedicated/ can not control axis directly".

I know very well both the pros and cons of both. I also know that certain manufacturers of certain standalone THCs made certain claims on their site and on the Mach3 forum that they agreed to remove/retract after I proved such claims were false.

My slight irritation is with those that either repeat these claims or they (like here) infer them without explanation or context. It's not a BIG irritation - but an irritation none the less.

[Boyan Silyavski]

Hi Boyan

Was just hoping for reasons why you say things like "dedicated THC is a MUST" and "Avoid cheap THC which are not dedicated/ can not control axis directly".

I know very well both the pros and cons of both. I also know that certain manufacturers of certain standalone THCs made certain claims on their site and on the Mach3 forum that they agreed to remove/retract after I proved such claims were false.

My slight irritation is with those that either repeat these claims or they (like here) infer them without explanation or context. It's not a BIG irritation - but an irritation none the less.

I remember now what you said there and it was well said. And as you say Sb had to take back his own words. Here i did not mean exactly that what the manufacturer said. Tried to explain above, why i start to try to avoid unnecessary complications, in other words - run like hell from software and search for hardware solutions. But for the people who love Mach3- lease just ignore my ranting .

[stirling]

well as you put it so nicely you're forgiven.

Not so sure about the love Mach3 bit though - it's done what's been required of it for 10 years so I allow it to stay...