SSO/FRO (Spindle Speed/Feed Rate Override)

[JAZZCNC]

KISS every time. Why use expensive encoders when pots work.

Both SSO/FRO are invaluable to me for getting the best out of machine and G-code. Equally they have saved my bacon many times when I cock up in code and when working with materials like Ali they are priceless when hit hard soft spots which happens lots on cheaper softer grades.

Certainly worth taking the time to get right.

[Boyan Silyavski]

KISS every time. Why use expensive encoders when pots work.

Both SSO/FRO are invaluable to me for getting the best out of machine and G-code. Equally they have saved my bacon many times when I cock up in code and when working with materials like Ali they are priceless when hit hard soft spots which happens lots on cheaper softer grades.

Certainly worth taking the time to get right.

I couldnt help but imagine this:

[JAZZCNC]

I couldnt help but imagine this:

No you don't quite get the KISS approach I mean.? . . . . .My KISS would have been to throw it out the window.!