DDSCV1.1 3 and 4 axis offline motion controller

[Boyan Silyavski]

Real life scenario today. Electricity stopped for a sec today, something with the fuse box or whatever. Flipped back the main interrupter at home, went to machine, hit "all go to 0" and after 3 min it was operational. It had not lost exact machine position .I had just to check if Z height is there correctly to be sure, as i have loaded 60 euro tool, All was there as it should be on place.

Went back to my PC to brag here about that. Mehh. 15 days in a raw , windows 10 attempts and fails to install updates. Read in internet, fixed registry, attempted manual update, fixed once, repeats with next updates without being able to fix. So in fact had to wait 10 min to update and 15 min to repair itself from inability to update. So half an hour later was operational. And have in mind that it does that twice a day and does not let me postpone or disable automatic update.On my pc. The one who invented that feature is N1 in my bad person list

Meanwhile machine was working at least half an hour doing steadily its job. For that time it made 6 parts . You tell me now what are you conclusions. I am not trying to convince anybody here.




Some people ask me on Youtube about macros. I dont know anything but lets see what the controller has in its memory. There is a file called "probe"

here is what "probe" is made of:

G04P0;ÔÝÍ£0s£¬ÎªºóÐø³ÌÐòÕýÈ·¶ÁÈ¡µ±Ç°»úе×ø±êλÖÃM5 ;¹Ø±ÕÖ÷Öá
(¶ÁÈ¡µ±Ç°µ¶¾ß»úе×ø±êλÖÃ)
#20=#864
#21=#865
#22=#866
IF#571EQ0GOTO1;Åбðϵͳ²ÉÓù̶¨Î»ÖöԵ¶Ä£Ê½»¹Êǵ±Ç °Î»ÖöԵ¶Ä£Ê½
(¹Ì¶¨¶Ôµ¶Ä£Ê½Ï£¬Çó³öX¡¢Y¡¢ZµÄ½ø¸øÁ¿)
#1=#572-#20
#2=#573-#21
#3=#574-#22
GOTO2
(µ±Ç°¶Ôµ¶Ä£Ê½Ï£¬X¡¢Y¡¢Z½ø¸øÁ¿ÇåÁã)
N1#1=0
#2=0
#3=0
(Òƶ¯µ½¶Ôµ¶³õʼλÖÃ)
N2G91G00Z#3
G91G00X#1Y#2
(ÒÔ100ËÙ¶ÈÏÂ̽100mm¼ì²â¶Ôµ¶ÐźÅ)
N1M101
G91G01Z-100F100
M102
G04P0;ÔÝÍ£0s
#402=#400;±£´æ×ø±êϵZÖáÁãµãÆ«ÖÃ
#403=1;ÉèÖÃ×Ô¶¯ÐÞÕý×ø±êϵ±êÖ¾
#404=-#870;±£´æ¶Ôµ¶¿éºñ¶È£¬Èç¹û֮ǰ¶Ôµ¶¿éºñ¶È²ÎÊýΪ0£¬Ïµ ͳ½«²ÉÓøñäÁ¿ÐÞÕý¶Ôµ¶¿éºñ¶È²ÎÊý£¬ÒÔÍê³ÉµÚÒ»´Î¶Ôµ¶
G91G01Z#575F#578;¶Ôµ¶Íê³É£¬ZÖá»ØÍË

I think that is Chinese, thats why the strange characters. So obviously things could be done



Also there is a file called "eng" which contains the specific machine settings, which could be altered on PC, loaded to say 100 controllers, if you a fitting it on a same machine. Which is great, so you don't have to program by clicking 100 controllers


inside its something like that:

&&#5 -t1 -s1"minimum log radius of 4axis machining" -s2"mm" -m0 -min=0.000 -max=999.999
#6 -t2 -s1"A axis rotate reference axis" -m0 -min=0.000 -max=3.000 -i0"X axis" -i1"Y axis" -i2"Z axis" -i3"not rotate"


#104 -t2 -s1"A axis optimal path when G0 run" -m0 -min=0.000 -max=1.000 -i0"No" -i1"Yes"


#34 -t1 -s1"X axis pulse equivalency" -s2"pulse/mm" -m2 -min=50.000 -max=99999.000
#35 -t1 -s1"Y axis pulse equivalency" -s2"pulse/mm" -m2 -min=50.000 -max=99999.000
#36 -t1 -s1"Z axis pulse equivalency" -s2"pulse/mm" -m2 -min=50.000 -max=99999.000
#37 -m0
#38=1280 -t1 -s1"A axis pulse equivalency" -s2"" -m0 -min=50.000 -max=999999.000
#39=0 -t2 -s1"A axis pulse unit" -m0 -min=0.000 -max=1.000 -i0"pulse/deg" -i1"pulse/circle"
#40=0 -t2 -s1"AB axis Selection" -m0 -min=0.000 -max=1.000 -i0"A axis" -i1"B axis"


#390 -t2 -s1"X axis DIR signal Electric Level" -m2 -min=0.000 -max=1.000 -i0"Low" -i1"High"
#391 -t2 -s1"Y axis DIR signal Electric Level" -m2 -min=0.000 -max=1.000 -i0"Low" -i1"High"
#392 -t2 -s1"Z axis DIR signal Electric Level" -m2 -min=0.000 -max=1.000 -i0"Low" -i1"High"
#393 -t2 -s1"A axis DIR signal Electric Level" -m0 -min=0.000 -max=1.000 -i0"Low" -i1"High"


#418 -t2 -s1"X axis Pulse signal Electric Level" -m2 -min=0.000 -max=1.000 -i0"Low" -i1"High"
#419 -t2 -s1"Y axis Pulse signal Electric Level" -m2 -min=0.000 -max=1.000 -i0"Low" -i1"High"
#420 -t2 -s1"Z axis Pulse signal Electric Level" -m2 -min=0.000 -max=1.000 -i0"Low" -i1"High"
#421 -t2 -s1"A axis Pulse signal Electric Level" -m0 -min=0.000 -max=1.000 -i0"Low" -i1"High"