First time build - Steel Frame CNC Router

**JAZZCNC** · 07-11-2016

Originally Posted by Clive S

Lee that looks to me to be the cheaper VFD

Yes thats the Huanyang Copy and best avoided.!

**Lee Roberts** · 07-11-2016

Originally Posted by JAZZCNC

Yes thats the Huanyang Copy and best avoided.!

Why?

**JAZZCNC** · 07-11-2016

Originally Posted by Lee Roberts

Why?

Mainly because No Isolation on Analog. But other smaller niggles are No RPM readout only Khz. Only 12Vdc output not 24Vdc for controlling external devices And I'm not sure but think it doesnt have onboard relay but been while since fitted one so may be wrong.

Then in general didn't like the build quality and the Manual was Crap.!

Huanyang Vfd's have got much better in recent years and now come with half decent paper manual. However they still have longway to catch up with likes of Invertek or IMO etc.

**Lee Roberts** · 08-11-2016

Originally Posted by JAZZCNC

Mainly because No Isolation on Analog. But other smaller niggles are No RPM readout only Khz. Only 12Vdc output not 24Vdc for controlling external devices And I'm not sure but think it doesnt have onboard relay but been while since fitted one so may be wrong.

Then in general didn't like the build quality and the Manual was Crap.!

Huanyang Vfd's have got much better in recent years and now come with half decent paper manual. However they still have longway to catch up with likes of Invertek or IMO etc.

KK, I'll email them now quickly and ask if its a gen Huan or not, though I quite like the look of the Invertek from Joe now I've seen them, I dont think the spindle's on their own cost that much now days do they, could be a nice investment if I was to pair them up using the 4 bearing version?

Originally Posted by JoeHarris

Looks a good option to me!

You'll have to go first then Joe, as i'm not that far in to my build yet

**JoeHarris** · 08-11-2016

Originally Posted by Lee Roberts

KK, I'll email them now quickly and ask if its a gen Huan or not, though I quite like the look of the Invertek from Joe now I've seen them, I dont think the spindle's on their own cost that much now days do they, could be a nice investment if I was to pair them up using the 4 bearing version?

You'll have to go first then Joe, as i'm not that far in to my build yet

You've seen my build log right?! A snail looks like an F1 car compared to my build. I want it finished!!

Sent from my iPhone using Tapatalk