Planet CNC initial setup and limits?

[ravihotwok]

WHat do you think of these switches for the limits and homing?
http://www.ebay.co.uk/itm/10x-Mini-M...3D121762604573

[Clive S]

WHat do you think of these switches for the limits and homing?
http://www.ebay.co.uk/itm/10x-Mini-M...3D121762604573

They are cheap switches but better than nothing. Surly the machine must have homing switches and if it has you should be able to set soft limits.

Take a step back and look at the machine and get to know it before you start playing with wires etc. How about some good pictures.

[ravihotwok]

the machine is at my mates house but hopefully will be fetching it round to my workshop later tonight so will take a load of pics and post them up mate. Couldn't see any switches on it. It is a 3020t model

[Clive S]

the machine is at my mates house but hopefully will be fetching it round to my workshop later tonight so will take a load of pics and post them up mate. Couldn't see any switches on it. It is a 3020t model

How about a link to it then

[ravihotwok]

http://essentialscrap.com/cnc/first_impression.html

[ravihotwok]

http://www.chinacnczone.com/cheap-af...e_l66_p26.html

[Clive S]

http://www.chinacnczone.com/cheap-af...e_l66_p26.html

According to their chat line limit and homing switches should be mounted already. But I am not so sure