Isel CPM 2018 or Unimatic Educam 20

[Steve-m]

all running now I need to decide what way to go with software untill today i thought my Mah3 was a full version but after a update its showing demo, so Mach4 (but after playing all day with demo cant get head around it) Mach3 licence
or the outsider UCCNC I did think of fusion 360 but pc is only 32bit Please someone give me some pointers

Steve

[magicniner]

or the outsider UCCNC I did think of fusion 360 but pc is only 32bit Please someone give me some pointers

Steve

Fusion 360 is CAD/CAM.
UCCNC, Mach3 and Mach4 are machine controllers.

You need both CAD/CAM AND a machine controller

The CAD/CAM is for creating models, tool-paths and G-Code, the controller runs the G-Code on the machine.

[magicniner]

untill today i thought my Mah3 was a full version but after a update its showing demo

Copy your license file back into the Mach3 folder, as Mach3 licenses are not legally transferable if you didn't buy a license you don't have one -

http://www.machsupport.com/license-delivery/

- Nick