Search:

Personally I would go with a dedicated pc

Hope you will have a better new year and hopefully your new nee holds up.
Best wishes Clive

My Battery & Charger is being fitted on the 12th Sept
The installation also includes solar panels clean.
Service every year for 10 years.
Guarantee on Bat. and charger 15 years.
Full monitoring...

I have just ordered a Growatt AC Charger & Growatt 6.5kw Battery for my 4Kw (16 panels) PV system that I have had for 8.5 years It has generated 31.95 MWh to date.

My system has a small inverter...

I take it you have looked at Dean's website Web site: www.jazzcnc.co.uk

4 core CY 1mm cable will be fine.

If you click on your name you should see it. If you don't see it make a few more posts.

I personally would go with the pulley and htd belt as that can help stop resonance.

I also noted that you don't have all the bolts in the bearing blocks and as BeagleBrainz has pointed out the...

Well Dean Jazzcnc has built hundreds of machines in all sizes and he is not a million miles from you.

look for his posts on hear.

Things are fine just getting older thanks. You have been missed on the other forum but I understand :loyal:

Glad you are well.

Not sure if you have seen this conversion with Linuxcnc and a P/port

The 125 has to be able to reverse the spindle depending on the tool used

For threading it need a slotted disc with index
...

Welcome to the forum Archie you must be psychic as there is a member on here Jazzcnc that builds machines to order and your budget seems good he may even have a second hand one.

Wish you all the...

All the resistor does is limit the current to about 12 to 15mA at 24V going through the led

Michael 2 people can easily lift 100 kg as you say just move the gantry to the centre and lower the spindle to a block on the bed .

If the control box is solid wired you might be able to put that...

Do you need to tell her :surprise:

Have you checked the parameters on the vfd like
PD005 400
PD006 2.5
PD007 0.5
PD008 230
PD072 400
PD073 120

PD141 230
PD142 10

In the Ebay listing it says screened CY cable but I don't see any screens in the control box and no star ground point. It also looks like the E-stop is at mains potential

Does the motor hum if so it could be the capacitor

Very funny :yahoo:

Is it one of his vertical machines :highly_amused:

I think you will be very pleased with and have many happy years of fun with it. :congratulatory:

This company https://chaloncomponents.co.uk/product-category/cable-management/tri-rated-cable/

will even sell it by the mtr.

Remember electricity does not care about the colour. In Spain the black wire is the live phase, where as here it used to be red now it it brown :apthy:

You might have a part 150mm thick and only want a pocket 5mm deep. :cower:

It might take 8 days to harden fully depending on the temperature

The very small ferrules are the hardest to crimp I have several crimp tools but this is the type of one that works the best for me
...