3 Axis CNC router

[JoeHarris]

Joe did it fix yours?

I'm not sure! Need to do some more testing. After devoting a massive amount of time to building my machine, I got it working and then just felt burnt out with it all and pretty much stopped all together. I have decided I am going to get back to it, finish the job and start actually using my machine!!

[m.marino]

I know the feeling. Best wishes. Yes, I still live and breath though it has been a good bit close a few times these last years. You deserve to enjoy the fruit of a huge amount of labor. So get to it and have fun making chips. Enjoy and good luck. Hopefully you will break fewer bits in the learning curve of feeds and Speeds.

[JoeHarris]

Thanks Micheal, a lot of work and no fruit so far, so this summer I hope to change that!!

[Clive S]

I'm not sure! Need to do some more testing. After devoting a massive amount of time to building my machine, I got it working and then just felt burnt out with it all and pretty much stopped all together. I have decided I am going to get back to it, finish the job and start actually using my machine!!

Nice to see you back again Joe

[JoeHarris]

Thanks Clive, good to see you are still on the forum. Looks like Dean hasn't posed in a while...