. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-10-2019 #3
    Doddy's Avatar
    Lives in Preston, United Kingdom.
    Doddy
    Last Activity: 4 Days Ago Has been a member for 9-10 years. Has a total post count of 1,364. Received thanks 188 times, giving thanks to others 66 times. Referred 1 members to the community.
    https://purelogic.ru/data/docs/elekt..._manual_ru.pdf - the instruction manual for the controller. This includes a basic wiring diagram on page 16 (you only need 3-axis, not 4 - just ignore the A-axis wiring).

    The challenges for you...

    You need 3 stepper drivers to convert the step/direction signals from the controller to signals suitable for driving the stepper motors. These will be part of your existing CNC driver board - likely integrated onto one board. A (decent) photo of the driver board would help us take this further.

    You need a spindle controller to take the PWM output from the SNC404016A16B to drive the spindle motor. This is likely a separate box that the spindle plugs into - again, a decent photo of this would help us advise further.

    What's missing from the wiring diagram are any axis limit switches - these should be easy to get working once you have the basic machine under control.

    EDIT: Apologies, Kit, think we answered about the same time.
    Last edited by Doddy; 01-10-2019 at 07:33 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DDSCV1.1 3 and 4 axis offline motion controller
    By Boyan Silyavski in forum Chinese Stand-alone
    Replies: 267
    Last Post: 14-05-2018, 06:57 PM
  2. Offline CNC Programmer Position for Arbroath based Oil Tool Manufacturer
    By Pioneer Oil Tools Ltd in forum Opportunities Available & Sought
    Replies: 3
    Last Post: 31-07-2017, 04:22 PM
  3. RFQ: Offline Programming, Small batch Milling work, Cad design
    By lacroft1 in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 25-02-2015, 07:51 AM
  4. Ecostep 200 Controller
    By cncland in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 14-11-2014, 07:43 PM
  5. Controller Box
    By M250cnc in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 21-11-2010, 01:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules