London based entrepreneur needing CNC partner

[JAZZCNC]

Maybe I will totally fail and lose everything, but I have some real interest and passion for it so at least I will give it a go. My enthusiasm means I started on the wrong foot so now I will find another way to move forward.

Hi Matthew,

Don't listen to the Nah sayers, you don't need 100K machines to build a very successful business. I have built machines for a customer who started with one small machine in a garage at the side of their houses costing £5k and now have multiple machines of different sizes, employing several people in 20,000ft premises turning over 500K + and all built up within 3yrs.
I have many customers who have started this way and built up great and profitable businesses on very low budget's and in my opinion, you already have what is needed and this is the drive, gumption, and bravery to give it a go.! . . . Good luck.

[hanermo2]

Agree.
A lot / most of our 15.000+ HAAS customers were like that, once upon a time.

Hi Matthew,

Don't listen to the Nah sayers, you don't need 100K machines to build a very successful business. I have built machines for a customer who started with one small machine in a garage at the side of their houses costing £5k and now have multiple machines of different sizes, employing several people in 20,000ft premises turning over 500K + and all built up within 3yrs.
I have many customers who have started this way and built up great and profitable businesses on very low budget's and in my opinion, you already have what is needed and this is the drive, gumption, and bravery to give it a go.! . . . Good luck.