ATC Push Button

[voyager1972]

you can also use the input output triggers to disable the spindle pushbutton relay for safety so you cant eject the tool during cutting ,,,enter the port and pin numbers you have set for spindle cw and ccw and set the port and pin for the pushbutton so that it disables the relay when an m3 or m4 is run

[voyager1972]

you can also use the input output triggers to disable the spindle pushbutton relay for safety so you cant eject the tool during cutting ,,,enter the port and pin numbers you have set for spindle cw and ccw and set the port and pin for the pushbutton so that it disables the relay when an m3 or m4 is run