trying to improve my board game

[M250cnc]

Having looked at the site and video for the game, do you really need CNC?

By the looks of it, you need a grid, which could be as easily made from strips of wood, notched + glued together, 4 sides, and a top & bottom.
All that could be done with a table saw, and a router table (cross cut saw would be far safer/more accurate, but cost more to buy), along with a few jigs, so you can machine parts in batches, then assemble them.

m_c is right.

But to cut large panels you need a dimension saw with a scribing blade these aren't gonna be cheap.

http://www.kelwoodmachinery.co.uk/in...FUgTfAodsVsfdQ

Then to cut a sheet of 8 x 4 you will need a working space of 20 feet minimum a good ceiling height to swing the panels around

To make the sides of your boxes you need to tongue and groove them, all doable on a table saw.

You should also have dust extraction

Its far easier to let someone else do all the work.

Then after laying out all that money who are you gonna blame if they are poor quality.

Phil