Quote Originally Posted by Jonathan View Post
Keep a spare then? Unless the proper ones are less than twice as much as the cheap ones and don't charge for repair you're still winning. I bought my second one and it arrived in about 4 days, not bad I thought.
Yes keeping a spare does make sense but it does workout more expensive. A quick look and I can get a 2.2kw torque vector drive for £137 and probably cheaper for flux drive(Non vector) if I shopped about. I've seen them as low as £99 +vat obviously the VAT don't matter if your business thats vat registered.

Just looking on ebay the Huanyang vfd would be approx £85 x 2= £170 plus VAT and import duty if your unlucky plus the usual £10 for the robbing shipping companys charge.
Yes it would probably be slightly cheaper because you'll get the first about £60-70 if bought with spindle. Yes you will have 2 drives but both will be Non vector drives even then thou it's still a close call if you buy like for like non vector drives that you could get 2 for only slightly more in UK. In this case then for the little extra it would still make more sense to buy local for warranty advantage.

If a business it's something that needs carefull attention and although 4 days hisn't long it's still 3 more than couriering from most places in UK, which could be as low as hours depending where purchased from. To a business even 1 day of down time could make the difference between making money and blowing money or going POP.!!

Personally If it was my main living I'd have a spare all the time and both would be vector drives bought in UK. . . . I'd also have a spare spindle.!