. .

Thread: BuildingAfloat

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-08-2012 #18
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    They do vary a little. Just had mine out of the spindle mount anyway as I'm investigating dynamic balancing and it's slightly different to that drawing. The main body is 80mm diameter for 200mm, then 11mm more at 68mm diameter, then the chuck protrudes by 39mm. When a tool is installed you need to add about 8mm to the length to account for the collet nut. It shouldn't make much difference to the Z-axis design...
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Jonathan For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules