Hybrid View
-
29-09-2012 #1
Hmmm
If it wants 7-12V then you can run a 9V battery a lot flatter than a 7.2V battery before it drops below 7V. The poor things do tend to fade before they reach their rated Ah.
I think it's looking for a 9 Volter.
Is it really drawing 400mA?
0.4A at 9V is 3.6W. Sees like a lot, does it run hot?
-
30-09-2012 #2
Actually after looking again , its running at 260mA / 800mW, I think also the voltage may affect the range, as it quotes 800m to 1600m @ 12v/280mA's So I might be better finding a 12v battery if I want the better range. The more powerful ones quote 900mA's/2500mW's
Wireless AV
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
30-09-2012 #3
I hope the tank battery is NiMh/NiCd not LiPo? If it's the latter then you need to be careful as they require a low voltage cutoff to stop them being damaged from over discharge. If it will tolerate up to 12.6V then a 11.1v (3 cells in series) lithium battery would be ideal since when fully discharged it would still be around 10V. Plenty on HobbyKing RC Plane, Car, Heli, Boat and MultiRotor Hobby Store ... if it's the first time you've seen that site you'll no doubt be up all night buying better batteries and all sorts for the tank!
-
30-09-2012 #4
What sort of size is the tank it's going into? Sorry don't know much about radio controlled models except some seem to be quite big. Just thinking that a 12v battery from one of those motorized cycles would probably do a good job. Friend of mine lent me 2 to power a small trolley & I was surprised how powerful they were for such a compact size battery.
-
30-09-2012 #5
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
-
30-09-2012 #6
He's going to attack the Reds from his living room via the Interweb.
-
30-09-2012 #7
I have T59 I know the weakspots lol Thread started if anyone is interested, I'll post as I go :)
Fiction is far more plausible when wrapped around a thread of truth
Nothing great was ever achieved without enthusiasm.
Ralph Waldo Emerson
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What voltage for stepper drive?
By Davek0974 in forum Plasma Table MachinesReplies: 1Last Post: 22-01-2014, 10:49 PM -
parralell port voltage.
By crossleymarko in forum Computer HardwareReplies: 71Last Post: 15-04-2012, 09:55 PM -
voltage on motor wires
By phill05 in forum General ElectronicsReplies: 9Last Post: 11-02-2012, 03:43 PM -
Alternator low voltage
By M250cnc in forum General ElectronicsReplies: 12Last Post: 24-02-2011, 11:23 AM -
Boxford VMC 260 steppers voltage?
By evildrome in forum Boxford Vertical MillsReplies: 3Last Post: 20-10-2010, 03:03 PM
Bookmarks