I will have a trial for programming job

[m_c]

Cutting speeds you work out from feed per tooth/insert, which varies depending on tools and materials. You then multiply the No.of Teeth x RPM x feed per tooth to give you the feed rate,.
However you'll first have to work out RPM from the recommended cutting speeds and cutter diameter.

The best option is find a tooling catalogue, look at some of the more common tools/inserts, and do some calculations.

[hoezap]

Cutting speeds you work out from feed per tooth/insert, which varies depending on tools and materials. You then multiply the No.of Teeth x RPM x feed per tooth to give you the feed rate,.
However you'll first have to work out RPM from the recommended cutting speeds and cutter diameter.

The best option is find a tooling catalogue, look at some of the more common tools/inserts, and do some calculations.

Thank you M_C

I did some search about a tolling catalogue but I couldn't find anything that match my need

do you have any experience about it where could I download a good and simple tooling catalogue

thank you in advance for your help