Thread: Gerber system 48
Threaded View
-
10-04-2013 #17
Point well taken. And well I was thinking the same thing thou I wish I would have seen that before I replaced the rectifier.
Short of removing the PCB and looking at the back for burn marks or incomplete paths, everything looked ok.
Just wondering if there's a chance it'll still run with that one cracked as bad as it is, or if it's a must replace to keep testing.
Or just recommend an electronics update. I've looked into gecko stuff and thou its more of a top end product (I'm assuming) I've looked at xories stuff and thou its cheaper I've read good reviews. But it may be just hit or miss. Don't think the software would be a prob cause he mentioned that before I had a chance too.
For what its worth I have a crappy net connection, tethering through a G network sux wouldn't be bad if it was 3G, so researching some things take forever. But reading forums ain't bad cause its mostly text. But when I can I go to a friends and use his net...
Anyways Thx any and all info is greatly appreciated.
Greg
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
gerber system 48 plus sizing problem
By nodgeruk in forum Machine DiscussionReplies: 1Last Post: 17-09-2014, 05:53 PM -
Gerber System 48 with Mach 3 software training required!
By Ahmed in forum Opportunities Available & SoughtReplies: 0Last Post: 07-11-2013, 08:56 PM -
gerber to dxf for PCBs
By Web Goblin in forum Computer SoftwareReplies: 4Last Post: 26-10-2013, 08:25 PM -
BUILD LOG: Gerber system 48 conversion
By martin54 in forum DIY Router Build LogsReplies: 14Last Post: 25-08-2013, 11:29 AM -
Gerber system 48 Plus router
By poppa jock in forum Machine DiscussionReplies: 0Last Post: 29-07-2013, 05:43 PM
Bookmarks