Advice on RoboCutters EagleIII CNC Machine 400x600mm

[John S]

but it seems quiet expensive so good freeware alternatives that people can recommend would be appreciated.



Phillip

It's not expensive, how much is your time worth, sounds like you want it for business, Cut2D has the fastest learning curve I have seen.
Problem with these freeware things is they were developed mainly as a hobby project by people with more time and money and it shows.

Download the Cut2D demo it will output code for the examples shown so you do at least get a chance to try it, Spend one night watching video's and another night using it and you are ready to go, it literally will be that easy.

[martin54]

It's not expensive, how much is your time worth, sounds like you want it for business, Cut2D has the fastest learning curve I have seen.
Problem with these freeware things is they were developed mainly as a hobby project by people with more time and money and it shows.

Download the Cut2D demo it will output code for the examples shown so you do at least get a chance to try it, Spend one night watching video's and another night using it and you are ready to go, it literally will be that easy.

I couldn't agree more John, cut2d was under £100 so not a lot for business software at all. Watched the tutorial videos & I was all set to go, some people have said it's a bit flashy but it really is easy to use & I don't have the time to sit trying to figure out how something is done or searching the net trying to find answers. The vetric forum is quite well supported as well so easy to find answers to questions if you have any.

I know the machine comes bundled with mach3 but if you were to download the latest version you would be able to get familiar with it before the machine arrived, least that would be one less thing you would have to do once the machine arrived.
If Jay has had to upgrade the wiring on his machine already then that's not really working straight out the box in my view, plus has he been running it 6 hours a day 5 days a week?

[Fivetide]

I have the baby Blackcat (older version of eagle) from Colin, all i can say is he will bend over backwards to help you in anyway he can..