. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-11-2013 #12
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    Quote Originally Posted by JAZZCNC View Post
    I see a reason.!!!!. . . . They are better.!! . . . and the price difference is not enough to justify not taking advantage of there more advanced features like better resonance handling and stall detect.
    Just because something that it better is available doesn't mean you need something better. The machine will run perfectly well with DQ860MA drivers.
    The cheapest AM882 drivers on aliexpress are currently Ģ56.18 each, versus Ģ37.65 for the DQ860MA. In my opinion it's not worth the extra Ģ18.26 when the machine will be fast enough with either.
    If concerned about stalling, then by all means get two AM882 drivers for the X-axis, but save Ģ36.50 and get cheaper ones for Y and Z.
    Last edited by Jonathan; 04-11-2013 at 01:12 PM.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Jonathan For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Leadshine website and AM882
    By EddyCurrent in forum General Electronics
    Replies: 12
    Last Post: 24-08-2018, 01:59 AM
  2. AM882 Alarm Circuit
    By Wobblycogs in forum General Electronics
    Replies: 8
    Last Post: 28-03-2014, 06:06 PM
  3. AM882 works with Protune - but not with the ZPA5-INT BOB
    By badgerman in forum Motor Drivers & Controllers
    Replies: 19
    Last Post: 01-09-2013, 09:44 PM
  4. Problem with AM882 drivers !..... or it could just be me !
    By Buba b in forum Motor Drivers & Controllers
    Replies: 10
    Last Post: 03-04-2013, 09:28 AM
  5. AM882,s and Mach3 ......plus hair removal !!!
    By Buba b in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 26-10-2012, 05:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules