Chinese 3040T Arrives

[Gregor]

Second Cut On My CNC 3040, Using A 60deg V Bit.Drop Velocity to 1500 and Accel up to 600 and it cut the time from 1h 30m to 1h 15m and the motors seem to be ok.In the first cut video I used a 30deg v tool

[JAZZCNC]

Second Cut On My CNC 3040, Using A 60deg V Bit.Drop Velocity to 1500 and Accel up to 600 and it cut the time from 1h 30m to 1h 15m and the motors seem to be ok.In the first cut video I used a 30deg v tool

Here's toolpaths suited to your cutters 30deg and 60deg but be aware they will cut much deeper has I limited the cut depth in the one you already cut.
These are full depth so you'll get more detail but will cut deeper and take longer so I suggest you have Mach3 do estimate run. I've put the depth in the name.

[Gregor]

Hi
Thanks JAZZCNC I will give it a try