VMC Tooling Advice Needed!

[mekanik]

It's a Trappaning Head used to cut holes in thin material, small hole is drilled in material same size as the bottom spigot and machine set to slow speed.
Mike

[JAZZCNC]

It's a Trappaning Head used to cut holes in thin material, small hole is drilled in material same size as the bottom spigot and machine set to slow speed.
Mike

Or it's what he said. . .Lol

[cncJim]

That's not a boring head it's an adjustable fly cutter IMHO.
A boring head is much more substantial.

Irving...

Ah, when I mentioned the boring head I was referring to the tool in the first picture (in the right hand tub) which I knew was 100% a boring head......... only because it said so on the side! lol! :)

I still thought the tool in the second picture was some sort of boring tool so thanks everyone for putting me straight.