Z-Axis setup

[EddyCurrent]

You don't give many details of what you have already, but this is as good a Z design as any; http://www.mycncuk.com/threads/7812-...1686#post61686
This was the design for my own machine; http://www.mycncuk.com/threads/6565-...5686#post55686

You can also look through these build logs to see if any other designs suit your application; http://www.mycncuk.com/forums/253-DI...ter-Build-Logs

This diagram shows some key points regarding design; http://www.cncroutersource.com/do-it...NC-router.html

[Yaser]

You don't give many details of what you have already, but this is as good a Z design as any; http://www.mycncuk.com/threads/7812-...1686#post61686
This was the design for my own machine; http://www.mycncuk.com/threads/6565-...5686#post55686

You can also look through these build logs to see if any other designs suit your application; http://www.mycncuk.com/forums/253-DI...ter-Build-Logs

This diagram shows some key points regarding design; http://www.cncroutersource.com/do-it...NC-router.html

Thanks for the information. I was wondering where I can find some hobby spindles that are not too epensive. I will look over the links and let you know if I have any questions.

[JAZZCNC]

Must be invisible so removed.

What's was invisible.?

[EddyCurrent]

What's was invisible.?

Glitch, ignore.