New CNC Mill on the horizon

[fvfdrums]

Thanks Clive and Dean.

That tri rated cable what size am I am looking at for the stepper power feeds?

[JAZZCNC]

Thanks Clive and Dean.

That tri rated cable what size am I am looking at for the stepper power feeds?

Well 0.5mm/2 would be ok on Max amp rating given most motors are rated around 4-5A but 0.75mm/2 will give plenty of safety margin if you'd prefer OTT. I think the Tri rated cable is safe to around 600Vdc so you no worries here.!!