mach 3 display screen resolution

[gianluca_g]

It happened to me once....
just changing the screen resolution (Im talking about windows control panel, not mach) and then setting it back how it was did the trick.
hope this helps

[JAZZCNC]

It happened to me once....
just changing the screen resolution (Im talking about windows control panel, not mach) and then setting it back how it was did the trick.
hope this helps

He's sorted out now it was just a simple thing.
If you minimise mach and then shut it down it remains minimised when re-opened. If you then expand the screen it stays minimised until you re-start Mach.

Paul just wasn't re-starting Mach.!