Wiring Diagram check

[cropwell]

G E

I had guessed the S stood for "Simple",

Guess again - it stands for SINGLE

I know what Bob you have, didn't I send you the manual in the first place ? I have two of those BoBs sitting in a drawer and two of the simple types, I made, with them. I plan to use 1 of each of them as replacements, but from then on any new controller will be ethernet.



I replied to your email on Sunday, I have forwarded a copy in case you didn't get it.


Jazz, I am actually trying to keep things as simple as possible and get OP shifting his gantry ASAP. I am just wondering if his original problem may have been the phase wiring on the stepper coils.

Jazz don't think I am having a pop at Yorkshiremen, I am not, every one of them I have met, were honest, down to earth, friendly and good humoured. In fact they both were. You can always tell a Yorkshireman, buuuuuut I am sure you know the rest.

Cheers

Rob

[eurikain]

G E
I had guessed the S stood for "Simple",
Guess again - it stands for SINGLE

Whoops ! Got me :)

I know what Bob you have, didn't I send you the manual in the first place ? I have two of those BoBs sitting in a drawer and two of the simple types, I made, with them.

Yes you did send me the manual :) See, the thing is that it's only today I realised that you were cropwell. I am getting more used to Rob :) Actually, where does that cropwell come from :D ? As in "crop well" ?

[JAZZCNC]

Jazz don't think I am having a pop at Yorkshiremen, I am not, every one of them I have met, were honest, down to earth, friendly and good humoured. In fact they both were. You can always tell a Yorkshireman, buuuuuut I am sure you know the rest.

Total Bull shit.!!! . . . . . Well know you've met 3 honest Yorkshire men.!! . . . . But I'm not really botherd Rob so carry on mate it's "watta of ducks arse" to me.. .

[eurikain]

Alright, so I've updated the wiring diagram with the following changes:
- simplified connections to the 6PST relay
- 6PST relay to be replaced with a contractor driven by a relay. Just didn't want to break all the connections and rewire everything
- 24V and 5V PSUs
- 12V fans wired in series to the 24V PSU
- limit switches moved input pin
- home switches wired in series, with override switch and 5V idiot-proof buzzzzzzzzzer
- two input pins left, most likely one of which for a touch probe to come in the next few months


I've also updated my original post with the answers to my questions and the new diagrams, so that anyone coming in the thread can follow along without reading through all messages.