Help needed with Mach 3 - reset external flashing light

[JAZZCNC]

in Output Signals Charge Pump signal is used with Port 10 and Pin Number 24, (Output 3, manual page 11)

Tom Charge Pump and Macro pump are completely different things so if you have set the Charge Pump Output this could be why having troubles.
Charge pump isn't used with Cslabs so clear this Output.

I presume this macro is kind of light tower?

Yes this is stripped down light tower code.

Light stays on after reset, which is kind of industrial standard for reset condition.
How to disable that light?
What have to be changed in script please?

Shouldn't do that it should go off. Clear the Charge pump output above and see if turns off.

[Tom J]

Shouldn't do that it should go off. Clear the Charge pump output above and see if turns off.

It did not, but not a problem as I changed IdleResetLamp to false when in 'Idle' so light goes of now.
I modify the GetTickCount CurrentTime and LastTime so lamp flashes exactly like in Mach3

Thanks Dean like always great help from you

Will start another threads about outputs, pins, terminals:)