New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Nr1madman]

Aah.. thats the way I have it and still squeaking ;)
Have it reversed on z but that works fine haha

Skickat från min SM-G955F via Tapatalk

[Desertboy]

Aah.. thats the way I have it and still squeaking ;)
Have it reversed on z but that works fine haha

Skickat från min SM-G955F via Tapatalk

I would try taking it off and reseating it as it shouldn't be squeaking, sounds like it's not sat in the bearing straight and maybe just reseating it will be enough.

[Desertboy]

Got the spindle back on was nice to see it move with the spindle on and test the water cooling hoses for kinks, etc during movement.

I am going to put the limit switches sideways on like someone suggested maybe 3cm away from the original switches, ordered a couple of roller type ones and have 1 spare. The original ones going to leave in place as hard limits so when I do get a latched relay I can wire it to that with all my other emergency stuff.

[Desertboy]

Water cooling works ;)

Still waiting on roller limit switches, box is 90% finished now.

[Desertboy]

Still no roller switches but found a spare one so i can fit 2 for the Y axis over the weekend, getting it fitted in place finally.