cnc spoilboard

[JAZZCNC]

Searching also Silvans phenolic paper. Any sources of 12/15 mm minimum 500x500 gratefully received.

In uk it's called Tufnol and it's also very expensive. Often used for making Jigs etc because very stable and easily machined. Thou it's dusty stuff to machine covers everything in yellow layer of fine abrasive dust.
https://www.directplastics.co.uk/tufnol-sheet

Is trespa waterproof so I can use coolant? Looks hard to find

Sent from my SM-N910F using Tapatalk

Yes it is. Often used in swimming baths for cubilcles etc. I came across job lot that from warehouse clearence that had been sat outside over 12months and it's fine.

[Dean jeffery]

In uk it's called Tufnol and it's also very expensive. Often used for making Jigs etc because very stable and easily machined. Thou it's dusty stuff to machine covers everything in yellow layer of fine abrasive dust.
https://www.directplastics.co.uk/tufnol-sheet



Yes it is. Often used in swimming baths for cubilcles etc. I came across job lot that from warehouse clearence that had been sat outside over 12months and it's fine.

I've used whale tufnol good but not as good as the trespa

[dfox1787]

I've used whale tufnol good but not as good as the trespa

I'm thinking aluminium spoilboard might be best for me when I'm using coolant. I'd consider another tslot bed on top on my current one but it's expensive. I need something I can surface as well.

Sent from my SM-N910F using Tapatalk