Search:

Alright!
Seems like I have sorted the usb trouble I was having.
Turns out it's the usb connector on the uc300board thats slightly misbehaving.
If I keep the usb cable slightly stretched to the...

I just soldered with heatshrink. Not pretty but it works :D

My stepper motors are grounded through the machine frame.
If connecting the wire shield aswell it might create a loop?

Skickat...

Haha :D what are you planning on clamping there Mr crazy-clamp? ;)

Skickat från min SM-G955F via Tapatalk

The 4Nm motors are STRONG! no need to worry :D


Skickat från min SM-G955F via Tapatalk

I was set on using the schematic from jazz since I started my build.
Then I read the thread about the first I posted and thought it made sense..
The one from routercnc has alot of extra benefits...

I followed this schematic
https://image.ibb.co/jthYfG/tapatalk_1511816242127.jpg
Its made by a forummember "euricain" I Think..

Then there is this from jazz...

Wooohooo :D

Nice!

Also good to see progress. I like the motormount, how did you cut it ? :)

About the circuit diagram.. do you want minimal but good or somewhat more elaborate?

Skickat...

Will have to delay this, the carving is a present and the receiver might be reading this :D

Skickat från min SM-G955F via Tapatalk

Update!

The machine ran for 7hours today with no fake stops. Feels amazing :D

Now I have to slowly reintroduce all connections with switches and vfd connections.
I'm hoping it will continue...

Further testing done.

Have not had any more problems since changing usb cable and usb socket in the computer.

I really hope that I have solved this now :D
Have a nightmarish 3d carving to try...

Alright.. extensive testing!

Bought a new usb cable. Needed atleast 1.3m long to connect it safely to my laptop. Only one I found was 2m long. Felt like a real gamble but I bought it anyway. Could...

Im envious!
Looks real nice

Skickat från min SM-G955F via Tapatalk

Nice! For some parts I wish i made a trialpiece first.. smart! ;)

Skickat från min SM-G955F via Tapatalk

Thanks Nick!

Can't take much credit as it's a free project ;)

Why do I think the worst when somebody hides behind politic :D

Have to make a dustshoe!
This has to be my next project!

My shop vac is so loud that I won't be able to stand by the machine as...

I know.. I know!
Should finish the machine but playing is sooo fun :D

Made another free vectric project ;)
https://image.ibb.co/eUu3B7/20180509_132207.jpg

Turned out real nice!

Skickat...

Awesome job!
Have you thought about what happens in the cable chain radius?
I think there has to be some "air" for the cables to move..? But I might be wrong :)
I'm thinking the cables in the...

Those are some sexy plates :D

Well done!

Skickat från min SM-G955F via Tapatalk

:D

I don't think they have stalldetect.
And I don't think stalldetect is as safe as everyone says ;)

The 2dm860 seems to have had an upgrade. The one that is linked to have a different cover...

Oh let me get back to you in a couple of months :D
Im just starting to learn my router.

What I do know is that they move my motors and I haven't had any issues (yet). Would the machine move...

So I thought :)

Skickat från min SM-G955F via Tapatalk

Alright :D

First test cut made!

https://image.ibb.co/kfwnen/20180328_094110.jpg

Was a bit of difficulties at first.
Got spindlecontrol working at first but with mayor problems.
Estop was...

Hello again!

Doesnt matter if you have dual 115 primaries or a single 230v. You can connect 2x115 in series to get 1x230 :)

Same with the secondaries.. you can look for 2x24v or 1x48 or 2x48v...

https://www.youtube.com/watch?v=9W3XrzJN_Wg

moooving :D

If anyone have the same problem as I had with uc300usb and e stop then I think I found a fix.

I hadn't made an error connecting it but it had a jumper that controlled if it was powered via usb or...