Search:

Saw that yesterday in a Facebook group. Wish it was there 8 years ago. But still, a very good option. Price is good also and its in Europe, not USA or China as usually.
And to those that will say...

Just checked my MTB and yes, if you push them from side, discs could bend but not easily, they are steel. But if mounted properly there will not be a problem. If a disk holds 100kg guy racing...

On the best diy heavy duty mill/lathe 4rth axis as far as i remember relation was 1:7 and there was possible via second belt change to raise that. And i remember talking to the guy and he was...

I have the following funny mind chart and i am very serious here. When i first look at sth i judge what i will need to break it.



If i can damage a machine or any element of it to render ...

Are you doing 1 case or are you designing a case to be sold? If second- better design it and look in China for a manufacturer. All else is insanity, especially with your knowledge.

If you are...

What do you need the machine for ? That's the main question.

if its to learn and make stuff, then better get a real mini mill /CNC/ , for that money an used one could be found. Smaller working...

Combine both and that's what you will have if you do not design properly the machine.

If you design your Z properly , use proper bearings and mount your spindle correctly, variant 2 will be non...

You will need separate DROs which are not expensive. Can not be integrated on a cheap or middle priced board. This could be done on very expensive boards only like the Galil and such that support...

Wow, sounds like a dead rat inside. Its not difficult to open and change bearings. Do it. Could be bearing or could be sth loose like the spring that pushes the bearings together, who knows....

Could be crap, could be good. I would advise against it. I i was buying it would ask if structure is welded, what motors, drives, control, picture of the frame underneath the table, and so on.
...

ABS needs an enclosure, simple from cardboard or polystyrene foam, or more complex from wood and glass. You could print simple stiff without a box enclosure but anything complicated will be a 100%...

If you guys dont mind will try to explain here some stuff in detail and offer some tips. Even if you are an advanced 3d print user you may find sth usefull

I use Simplify 3d and IMO is worth the...

Sorry to resurrect this one, but now as many members may have a 3d printer. If someone needs exact fit dust shoe for his machine, i can send custom STL, as i can draw it very fast as my design is...

If you want a reliable printer and your money to go into the right direction buy Prusa or Steel, as they have better quality electronics.


Hi guys, a bit late in the discussion.

If you...

The easier way to find the edge in the settings is to profile say a 50mm circle with each pass say 0.2mm deeper, so soon its starts to get clear what's happening

50mm circle inside a square is the...

I have done that and agree. But all went well when i opened carriages, cleaned them from scrap , lubricated them and problem solved. Work fine

Just FYI at devcad.com is the best software for foam cutting i know of. I personally use DevFoam and i greatly encourage you to obtain it. Beats hands down any Mach3 screen. And with CNC foam you...

Sorry but it's like buying a kite to learn basics of flying.

You need a proper mini mill at least to learn basics of machining. I wouldn't spend a single $ on a stuff like that. Also if you want...

If you have properly done your setup, you can set the Amps as you want but not more than the size of the setup, then slowly amps drop. Thats how you read at what anodizing stage you are.

If you...

Check at the back if there are any jumpers. My power supply has jumpers that change the mode of it, so that may be the reason. Use thick wires and clean your plates. What plates are you using inside...

No difference if you stir it properly, without introducing too much air. Remember you torch it later also. But i agree that vacuum is best

25253

Good Health and Luck to You All!

Just saw that on another forum, looks very good for the money if you need a large machine https://www.uksignboards.com/topic66641.html

You are a master Dmitriy! Send me some info how you price your work, as i may have local clients from time to time.

Year 2018 at the prices of square linear rails, ball screws and electronics, i would not even think of making a MDF, V bearings, Rack and Pinion machine. That's it. Better make a small well made...