Search:

Ray,

Taking into consideration all of your responses to all of the threads you have posted, my conclusion is this;

You want to make guitars so just buy a cnc machine that is already built, be...

I see, it's a plan that's for sale on Etsy from a seller called, CraftyWhiskeyBarrel.
Interestingly the purchase also includes an electrical schematic diagram, in fact everything you need for the...

Due to the recent fleeting nature of the offical Cambam forum, Lee was kind enough to add a dedicated section here for Cambam users.

Cambam official forum: https://cambamcnc.com/forum//
Link to...

Look on ebay.co.uk for item number 182739548952 sold by "rennie_tool"
These are solid carbide 2 flute spiral ballnose, good price, cut well in hardwood, long lasting, available in all sizes and...

Use a meter to identify the Gnd pins, this should hopefully determine the layout.

You want CY cable and it can be found at most suppliers, just find the best price.

When it comes to inverters there's more to it than the motor current so my advice would be, go to this...

In CamBam for example you would set up two boundary lines, one for the outer diameter and one for the inner. Next, convert the space between those boundary lines to a "Region", the 3D machining...

Looks okay, did you check both ends with radius gauges ?

I'm not a fan of marker dots these days, I just use side dots and one at the 12th fret as a logo.

What's the difference between a...

Sorry about the oversight earlier, these two files are correct and as per drawings.

Images show the stl files opened in CamBam

In the CAD (Rhino6) I used a "Two Rail Sweep" with the end...

Try this, Yngwie :cocksure:

Edit: this file was incorrect, the correct ones are attached to a more recent post below

Re. linear rail lubrication.

Have a read at this thread; http://www.mycncuk.com/threads/4862-Profiled-rails-Installation-guidelines-and-manufacturer-comparison-chart

The right stuff at a good...

The title of this thread is; "Best cheap Spray Paint Guns for DIY CNC builder or small workshop"
With key words being, "Best cheap"
Boyan is therefore not trying to say these are as good as...

I didn't know about that extension, thanks. CamBam has a similar plugin, http://www.atelier-des-fougeres.fr/Cambam/Aide/Plugins/BoxAuto.html
There's also a script I did for finger joints,...

No offence intended, it just occurred to me that a pattern seems to be developing and I wanted to understand why.
On this and other similar forums I've noticed over a period of several years that...

Was a search engine no use ? :confusion:

Desertboy, have a read here; http://www.mycncuk.com/threads/7273-Greasing-Hiwin-HG15?highlight=hg15+grease
and here;...

Also check this;

PD026 stopping mode, it should be set to 0 (decceleration stop)

Just to help things along in future, I would always let the spindle come to a standstill before pressing RUN...

That sounds good and correct.
Pin 1 Phase 1
Pin 2 Phase 2
Pin 3 Phase 3
Pin 4 Not Connected

The spindle needs checking out as cropwell explained.
Regarding parameters I would change...

Probably most CAM software gives an estimate of the cutting time once you have the geometry and toolpaths defined, I know for certain that CamBam does. This means an estimate can be obtained without...

I used those type for home position, the drawing shows how they were connected.
3 wire type working from 24v DC

This is the mounting arrangement, you want the striker to move past them, not up...

It seem that information was unworthy of a response, so good luck with your panel.

Plunging can leave marks on the edge, ramping into the cut is a far better method.

Measure the thickness of the MDF, if it's more than nominal then it likely has moisture content and that can make...

There was a good discussion here about cutting aluminium; http://www.cambam.co.uk/forum/index.php?topic=6771.msg54968#msg54968

Thanks for the spraying info, very useful.
I've just seen http://behlen.co.uk/ are only selling the General Finishes now in the UK, the Behlen instrument finishes were rather good.

Nice job on...

relevant to what ?

Regarding current, read this;...