. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 04-03-2018 #1
    HullMark's Avatar
    Lives in Hull, United Kingdom.
    HullMark
    Last Activity: 10-03-2018 Has been a member for 6-7 years. Has a total post count of 30. Received thanks 1 times, giving thanks to others 21 times.
    Quote Originally Posted by JAZZCNC View Post
    It's using rotating ballnuts which are fastened to gantry sides.
    Could if you wanted use conventional ball screw setup but the end brackets would need changing and you'd fasten the ballscrews to profile using BK blocks.
    Yeah I've just been looking at some of those ... what size rails and screws will i need, both 25mm?

    http://www.mycncuk.com/threads/6997-...nut-Design-MK3

    These seem fairly straight forward to put together

    Sent from my SM-G935F using Tapatalk
    Reply With Quote Reply With Quote
  2. 04-03-2018 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by HullMark View Post
    Yeah I've just been looking at some of those ... what size rails and screws will i need, both 25mm?
    Yes 25mm for both. Thou could actually get away with 20mm Rails if wanted but for the little extra then I wouldn't.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM
  2. BUILD LOG: New Build Log ... 2440 X 1220 X 300
    By Wobblybootie in forum DIY Router Build Logs
    Replies: 30
    Last Post: 17-10-2014, 11:20 AM
  3. WANTED: 3 bits of 250 by 1220 by 40mm t-slot, 1220 16X5 threaded rod and isel ballscrew, plus
    By nobby in forum Items Wanted
    Replies: 1
    Last Post: 01-03-2014, 01:31 AM
  4. BUILD LOG: Steel Router 610 x 1220 x 200
    By Stickio in forum DIY Router Build Logs
    Replies: 12
    Last Post: 18-08-2011, 07:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules