. .

Thread: New start

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 14-03-2018 #11
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 3 Days Ago Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    Quote Originally Posted by Nickhofen View Post
    It will!!!
    Why you are not satisfied with the UC300 usb version?
    Here at post#158 Jazzcnc explains why the usb version is better than the parallel one.
    http://www.mycncuk.com/threads/10911...655#post100655
    UC have a USB or ethernet solution, Jazz was comparing using a PC with PP for step generation. UC cards are step generators. It gets confusing because like me nr1madman is using a cheap PP BOB to connect to the steppers, switches etc.

    but the connection to the PP BOB is running a lot faster than if it was a PC PP. A few people have warned that using that cheap board will limit upper performance but I was told you will be able to run at least 50khz per axis with that cheap board connected to a step generator if you need more you need a better breakout board. For my Mesa card it's £100 for the better BOB so I'm happy to use my existing BOB for now and 50khz is actually a lot depending how you set microstepping.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Desertboy For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 9 users browsing this thread. (0 members and 9 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules