Quote Originally Posted by JAZZCNC View Post
Don't know if you are using USB version or not but I'd check your PC settings because could be energy saving shutting down the USB ports when thinks Pc is idle.? This would have the same affect as E-stop to the controller because lost connection with PC which would explain why still get E-stop message when not connected.!

Could even be a program working in the background which try's to check ports etc causing blip just long enough to trick controller it's lost connection.
This might be it.. not power setting but background programs.
I have checked power settings and they are set to "always on"

I'm using my old home computer so there are all sorts of programs installed. Should test reinstall but I have no valid windows cds left. Stuff like that gets destroyed some were between child 2 and 4 ;)

Its still strange that it starts to happen after about 2h and not when running pockets and contours just 3d....

Skickat från min SM-G955F via Tapatalk